HyperSmash SOLUSI MASALAH KOMPUTER & NOTEBOOK: Setting Speedy Untuk ADSL Modem TP-Link

Tuesday, October 9, 2012

Setting Speedy Untuk ADSL Modem TP-Link

ADSL Modem TP-Link

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
  7. WAN Setup - Summary, Save
  8. Save/Reboot
Setting PPPoE:
  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  7. Cheklist Enable WAN Service, Service Name: Speedy, Next
  8. WAN Setup - Summary, Save
  9. Save/Reboot


Terima Kasih telah mengunjungi blog Solusi Masalah Komputer & Notebook. Semoga tips dan artikel ini bermanfaat untuk kita semua.
.
 
 

No comments:

Post a Comment

Mohon Berikan Komentar Yang Berkualitas dan Membangun